One or two people have mentioned on here and other forums that they prefer not to use the TM 28...difficult to dial in, never ran right, etc.
I've got a new TM 28 that I wanted to use to replace a solid mount Dellorto 28 PHBH.
Does anyone run this carb...not the PWK 28 or ScootRS type, but Mikuni TM 28? If you do what barrel set up do run with it and how is it?
Thanks
Mikuni TM28
-
red ghost
- registered user
- Posts: 545
- Joined: Wed Jan 07, 2009 7:46 pm
- Xbox live gamer tag: Pleasure Master
- Main scooter: lambretta gp150
- Location: Gold Coast Queensland Australia
- Contact:
Do a search on here,there was a post a couple of weeks ago regarding these carbs
How come phonetics isn't spelt with an 'f'?
Check out my boobs! <-- <--Just imagine being burried between those puppies!
Check out my boobs! <-- <--Just imagine being burried between those puppies!
-
Robi D
- registered user
- Posts: 163
- Joined: Thu Jan 29, 2009 9:08 pm
- Location: Amherstburg, Ontario, Canada
- Contact:
i just switched from a 28 to a 24. i could never get it to work quite right and then when all seemed to be going well, it turns out it was running quite lean. then came issue after issue, i had the new 24 so i just switched to it.