ts1 225- whats the best gearing set up?
hi just about run in my ts1 225,i am currently running this engine with a 30mm phbh dellorto with remote filter & jl 3 exhaust,gearing at the moment is li 150 series 3 with 17x48 sprockets giving me a 4th gear ratio of 4:80,is this about right ? or am i way off the mark ! ? thanks for any info. db
-
noggin1969
- registered user
- Posts: 78
- Joined: Thu Jan 08, 2009 6:59 pm
- Location: Newark
- Contact:
ts1 225, mikuni 35 & jl 3 exhaust , gearing is li 150 series 3 with 17x46 sprockets works for me giving me 4.7 i think
Has a mind full of useless s**t and isn't afraid to use it !
-
Bufficus
- registered user
- Posts: 271
- Joined: Wed Jan 07, 2009 1:38 pm
- Location: Chelmsford, Essex
- Contact:
4.8 should be fine with a JL3db67 wrote:hi just about run in my ts1 225,i am currently running this engine with a 30mm phbh dellorto with remote filter & jl 3 exhaust,gearing at the moment is li 150 series 3 with 17x48 sprockets giving me a 4th gear ratio of 4:80,is this about right ? or am i way off the mark ! ? thanks for any info. db