Hello:
I have a mugello 225 with a 60x107 crankshaft:
What should be the measures of the base gasket and head gasket?
Thank you very much.
Mugello 225 with 60x107 crankshaft packers and gaskets.
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
That depends on you casing. Assemble it with no gaskets and measure how far in or out of the top of the barrel the piston is ay TDC.
Then nip down the head and check the squish gap, you're aiming for < 1.5 mm. Then its just arithmetic.
You can adjust the base and head gaskets within that range to get the desired results.
Sent from my HTC Desire C using Tapatalk 2
Then nip down the head and check the squish gap, you're aiming for < 1.5 mm. Then its just arithmetic.
You can adjust the base and head gaskets within that range to get the desired results.
Sent from my HTC Desire C using Tapatalk 2
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."