Avanti and TM24
-
ScooterLoopyJohn
- Dealer
- Posts: 65
- Joined: Wed Jan 07, 2009 4:37 pm
- Main scooter: 1970 GP 195cc A/F s'type
- Location: Waterlooville Hampshire
- Contact:
Hi Avanti with a 60 stroke and 24TM carb and air box . 185 main 22.5 pilot needle 5n13 top clip very close to perfect. will repost after dyno
-
Agent Buchwald
- registered user
- Posts: 79
- Joined: Thu Mar 05, 2009 6:15 pm
- Location: Brighton
- Contact:
Interesting to see if it acts as a restriction anywhere - could you post with what Ron would expect from the same engine with say a PHBH 30mm or whatever he recommends?
-
Adam_Winstone
- registered user
- Posts: 1693
- Joined: Tue Jan 31, 2012 8:54 pm
- Main scooter: Lambretta GP
- Contact:
Watching with interest 
-
drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Ditto
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
Honeymonster
- registered user
- Posts: 45
- Joined: Sun Mar 15, 2009 12:28 am
- Location: Lincoln
- Contact:
What exhaust are you using SLJ? top clip on a 5N13 is usually lean but what atomizer are you using?
I'm running the TM24 on a 60 crank with an RT 220, breath easy filter, LTH stage 6 reed valve and MB clubman, current setting are, 25 pilot, P8 atomizer, 5N13-3, 3mm slide and 200 main but still running in the high 600's, have been looking at a low compression head from Mark to look for more cool running.
Will be interested in your dyno results.
Ian
I'm running the TM24 on a 60 crank with an RT 220, breath easy filter, LTH stage 6 reed valve and MB clubman, current setting are, 25 pilot, P8 atomizer, 5N13-3, 3mm slide and 200 main but still running in the high 600's, have been looking at a low compression head from Mark to look for more cool running.
Will be interested in your dyno results.
Ian