Does any one have any advice for a race rapido 230 wIth 30mm carb. I am running any NK Rally Road pipe, but just after some ideas.
Cheers
Rapido 230 Jetting Advice
-
servetakid
- registered user
- Posts: 395
- Joined: Tue Feb 22, 2011 9:06 pm
- Main scooter: Jet 200
- Contact:
-
servetakid
- registered user
- Posts: 395
- Joined: Tue Feb 22, 2011 9:06 pm
- Main scooter: Jet 200
- Contact:
It's a 30mm PHBh
according to the AFR jetting chart for a race rapido 225 with an expansion,should get you somewhere near
Main 128
needle jet AV266
needle X7 second clip
slide 30-40
pilot 55
choke 70
mixture 2.5 to 3.5 turns out
Main 128
needle jet AV266
needle X7 second clip
slide 30-40
pilot 55
choke 70
mixture 2.5 to 3.5 turns out
I am playing all the right notes, but not necessarily in the right order.
-
servetakid
- registered user
- Posts: 395
- Joined: Tue Feb 22, 2011 9:06 pm
- Main scooter: Jet 200
- Contact:
Cheers for that, I will use that as a base and up-jet from there.
I would be interested if any one has any jetting advice from any piston ported 230 with the 30mm PHBH?
I would be interested if any one has any jetting advice from any piston ported 230 with the 30mm PHBH?