series 2 key ignition

[wurzel]

Am I right in thinking that if I change a series 2 to key ignition I would have to use a TV 175 series 2 type and where would I get one or are there any other types that will fit. Would I also need the TV type light switch.
Cheers Mark

[corrado]

I would have thought that you could fit a Casa ignition switch. You can't fit the TV light switch and surround to an Li headset, the holes are in different positions. Li lower headset is different to a TV one.

[DigDug]

As corrado said you only need to use the switch as a kill switch with the green wire and not touch anything else.

[jason frost]

Apart from the pink

Sent from my BlackBerry 9300 using Tapatalk

[wurzel]

Cheers folks

[DigDug]

Apart from the pink

Sent from my BlackBerry 9300 using Tapatalk

It's been a while since I touched the pink....

[squeakmillward]

tipping the velvet only memories

[jason frost]

Apart from the pink

Sent from my BlackBerry 9300 using Tapatalk

It's been a while since I touched the pink....

LOL

[wurzel]

last time I got me hands on the pink I accidentally touched it with the purple and it blew a fuse

[thebassmasta]

just wire it up the same a gp/li/sx use the ignition switch as your main switching, just isolate the wires on the handlebar switch for the lights, wire up the horn and dip switch, simples