Was given a Halogen 12V 35/35 bulb.
Will it cause anyprobs as it's not 25/25?
35/35 instead of 25/25
not really it might be a little dimmer at tickover
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
I think all the 12 halogens are 35/35watt, well mine was. As Torchy says, the headlamp may be a bit dimmer on tickover, also it will go VERY dim when you hit the brake pedal 
Does the lamp have a cup under the dip filament? A lot of these halogens don't have the cup and as a result there is no diference between main and dip
Does the lamp have a cup under the dip filament? A lot of these halogens don't have the cup and as a result there is no diference between main and dip
-
Bilko
- registered user
- Posts: 1346
- Joined: Thu Jan 08, 2009 12:06 pm
- Main scooter: LI150
- Location: Belfast
- Contact:
Noticed that when putting it on!coaster wrote:Does the lamp have a cup under the dip filament? A lot of these halogens don't have the cup and as a result there is no diference between main and dip
-
coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
You can always use the rear brake to dip/dim the headlampBilko wrote:Noticed that when putting it on!coaster wrote:Does the lamp have a cup under the dip filament? A lot of these halogens don't have the cup and as a result there is no diference between main and dip
