Carb set up
I've got a 125 with 175 barrel and head it's been ported now I'm running a 28mm dellorto with remote filter and sterling exhaust any ideas on carb set up etc as rode the weekend and tried to open up throttle through gears and it doesn't bog down etc it just won't pull etc ?
It's a Lammy gp ?
-
Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
lol..bit more info needed Simon, whats the carb settings..main jet/idle/needle/clip positon slide..exhaust, gearing so on and so on, its important you reveal the full set up, also check the set up pages on here and try to closely match an already well set up machine with the same spec then thats your starting point...check plug colours at frquent intervals (you need a chocolate colour plug at all rev range ) not white or light (failure colour )simonwwfc wrote:It's a Lammy gp ?
Ricspeed, gone but never forgotten RIP my friend #59
Sterling exhaust , 28mm dellorto , remote filter , 120 main jet , clip position 2nd from top
-
Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Also think about gearing and exhaust.
Standard gearing . Sterling exhaust
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
What are the -
Slide
Needle
Choke jet
Pilot jet
Atomiser
Slide
Needle
Choke jet
Pilot jet
Atomiser
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."