Lambretta Disc Brake Hydraulic ANTI - DIVE Disk Disc Kit

[Spud]

Any one using one of these?

http://www.ebay.co.uk/itm/Lambretta-Dis ... 2ec5008de2

Are they any good?
cheers
Spud

[joeswoonara]

yes i`ve got one on my s2 ....use it with a concealed master i really like .....and a lot safe than a 40/50 yr old backplate imho

[Muttley McLadd]

That's a HUGE amount of money.

This is about the same price. Admittedly, you'd need a hose and a master cylinder, but you'd probably replace those anyway with one from the far east. And, it's tubeless.

[Minority]

Works really well, I've just fitted the anti dive update to mine and that was really worthwhile. A lot of people in our club, PLSC, use them. Also available from justlambretta.com who is renowned for good service and good prices for forum members.

[rbgaz]

Works really well, I've just fitted the anti dive update to mine and that was really worthwhile. A lot of people in our club, PLSC, use them. Also available from justlambretta.com who is renowned for good service and good prices for forum members.

hi is that a newer version of the tie bar on your scootsrs anti dive ?

[Minority]

Works really well, I've just fitted the anti dive update to mine and that was really worthwhile. A lot of people in our club, PLSC, use them. Also available from justlambretta.com who is renowned for good service and good prices for forum members.

hi is that a newer version of the tie bar on your scootsrs anti dive ?

No, just a little mod coz I thought it looked sexier

I'd seen something similar on a couple of forums so I thought I would give it a go.
The rose joints I used are much better quality than the ScootRS ones, but will it make any difference to how well it works, I don't think so .

Parts used cost about 10 quid:

http://www.ebay.co.uk/itm/M8-Female-Ros ... 0796576064?
http://www.ebay.co.uk/itm/M8-x1-25mm-Ma ... 0884700715?

[Andy Pickering]

Does look great..might change mine for a £10 any other mods needed or just straight bolt on?

Sent from my GT-I9300 using Tapatalk 2

[Minority]

Does look great..might change mine for a £10 any other mods needed or just straight bolt on?

Sent from my GT-I9300 using Tapatalk 2

Yes Andy, it is a straight bolt on replacement (for my kit). Just needs the two rose joints as linked, plus an 8mm nut to lock up when adjusted. I think you should treat yourself!

[RICSPEED]

Does look great..might change mine for a £10 any other mods needed or just straight bolt on?

Sent from my GT-I9300 using Tapatalk 2

Yes Andy, it is a straight bolt on replacement. Just needs the two rose joints as linked, plus an 8mm nut to lock up when adjusted. I think you should treat yourself!

is that one male thread and one female rose joint ?

[Minority]

Does look great..might change mine for a £10 any other mods needed or just straight bolt on?

Sent from my GT-I9300 using Tapatalk 2

Yes Andy, it is a straight bolt on replacement. Just needs the two rose joints as linked, plus an 8mm nut to lock up when adjusted. I think you should treat yourself!

is that one male thread and one female rose joint ?

Yes, exactly as linked:

http://www.ebay.co.uk/itm/M8-Female-Ros ... 0796576064?
http://www.ebay.co.uk/itm/M8-x1-25mm-Ma ... 0884700715?

The male just screws into the female (so to speak ) and is locked with an 8mm nut.

Cheers, John