PX problems
-
- registered user
- Posts: 82
- Joined: Mon Jun 27, 2011 1:25 pm
- Main scooter: 1988 MotoVespa TX200
- Location: Helensburgh
- Contact:
Try another flasher unit, sounds like its knacked.
Has the fault just appeared or have you just rebuilt the scoot?
Has the fault just appeared or have you just rebuilt the scoot?
1983 Vespa PX125
1984 MotoVespa P200E
1988 MotoVespa TX200
1984 MotoVespa P200E
1988 MotoVespa TX200
Check front bulbs,
Check front earths,
I am sure back wont flash if fronts don't work.
Then unscrew the indicator switch and make sure all 6 wires are still soldered on.
Then head relay area.
Shaun.
Check front earths,
I am sure back wont flash if fronts don't work.
Then unscrew the indicator switch and make sure all 6 wires are still soldered on.
Then head relay area.
Shaun.
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Could be something as simple as a wire off in the switch. That's an easy check too 

CakeAndArseParty
-
- registered user
- Posts: 82
- Joined: Mon Jun 27, 2011 1:25 pm
- Main scooter: 1988 MotoVespa TX200
- Location: Helensburgh
- Contact:
Remember to post up when you find the snag. It'll help others out when they have a problem and are searching the forum for the solution 

1983 Vespa PX125
1984 MotoVespa P200E
1988 MotoVespa TX200
1984 MotoVespa P200E
1988 MotoVespa TX200
-
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
Every problem i`ve had with indicators has been in this order :-
1. broken wire on switch
2. bad earth
3. crap in panel socket
4. Bulb
5. Switch knackered internally
6. Flasher
best of luck !
1. broken wire on switch
2. bad earth
3. crap in panel socket
4. Bulb
5. Switch knackered internally
6. Flasher
best of luck !