indian 225 kits
Posted: Mon Aug 27, 2012 7:35 pm
Are they any good ?are they to be avoided ? will they fit in a italian gp150 engine ?
Thank you . :baddevil:
Thank you . :baddevil:
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
indian 225 kits
Page 1 of 1
Re: indian 225 kits
Posted: Mon Aug 27, 2012 7:36 pm
some; some; no (stud spacing)
Re: indian 225 kits
Posted: Mon Aug 27, 2012 7:59 pm
This is what i was looking at .
Re: indian 225 kits
Posted: Mon Aug 27, 2012 8:13 pm
Once youve slung the piston in the bin and had a top tuner rework the rough barrel and head yes they can be good 
, theirs ton of pages on here asking the same, do a search..seems sodding cheap like..
, theirs ton of pages on here asking the same, do a search..seems sodding cheap like..Re: indian 225 kits
Posted: Mon Aug 27, 2012 9:00 pm
As Bristol Mod said, they are for the 200 cases, the stud holes are different. You need the 185 kit which you will also find on ebay. The quality can be a bit hit and miss, the ports will probably need tidying and the piston to bore clearance will need to be checked and honed if necessary.stumpy wrote: This is what i was looking at .
Re: indian 225 kits
Posted: Tue Aug 28, 2012 6:46 pm
thank you both :bigsm:coaster wrote:As Bristol Mod said, they are for the 200 cases, the stud holes are different. You need the 185 kit which you will also find on ebay. The quality can be a bit hit and miss, the ports will probably need tidying and the piston to bore clearance will need to be checked and honed if necessary.stumpy wrote: This is what i was looking at .