RAPPIDO 225 CLASSIC CARB SET UP
-
- registered user
- Posts: 118
- Joined: Sun Oct 30, 2011 9:36 am
- Main scooter: lambretta s2 li225 ts1
- Location: Spalding,lincolnshire
- Contact:
Now mate i had that set up but a jl3 pipe 55 idle, 40 slide, av266, x7 clip on 2nd from bottom , 128-130 main. If scoot stutters with 130 flat out try 128 main cant be far off check plug colour should be a nice chock brown . Had a ram air filter on :fb:
-
- registered user
- Posts: 23
- Joined: Sun Apr 19, 2009 11:58 am
- Contact:
Also use a 300 fuel needle valve!
+1,tried a 125 main bogged slightly so have dropped down to a 122tony81 wrote:i have same set up 40 slide 70choke 55idle x7 needle (second clip down from top)av266 122main runs very nice also try open mouth carb then put a filter on filter slightly slows it down.
I am playing all the right notes, but not necessarily in the right order.