Morning all
Im having trouble setting up a PHBH 30mm
Tickover is sitting at about 2k'ish
The idle screw dont seem to work
Ive set the airscrew at 2 turns out
I can bring the tickover down by turning the airscrew out
Am i right in thinking ive got an air leak somewhere ??
idle
-
Stinky Finga
- registered user
- Posts: 67
- Joined: Tue Mar 22, 2011 11:45 am
- Xbox live gamer tag: ST1NKY F1NGA
- Playstation gamer tag: shamoane
- Main scooter: Series 2 230 MONZA
- Location: Heathrow
- Contact:
-
twenty eight
- registered user
- Posts: 60
- Joined: Sat Apr 10, 2010 8:52 am
- Contact:
have a look at the carb rubber you could have a split in it or you could have a split manifiold gasket
-
Minority
- registered user
- Posts: 673
- Joined: Wed Feb 01, 2012 2:00 pm
- Main scooter: Li230 S3
- Location: Perth, Western Australia
- Contact:
When the idle screw didn't work on my 30PHBH it was simply that the throttle cable was adjusted too tight and the slide wasn't closing all the way. I loosened the adjustment at the top of the carb and "hey presto" the idle screw worked.
Sometimes it is the easy things. :biggrin:
Sometimes it is the easy things. :biggrin: