rapido jetting advice needed

Check here for a list of various carb set-ups to help with jetting and all aspects of carb trickery!
User avatar
rapido230
registered user
Posts: 72
Joined: Thu May 24, 2012 9:14 am
Main scooter: vespa 210 & lambretta gp
Location: norwich
Contact:

hi, yes another jetting enquiry
set up:
rapido race 225
race tour piston
stage 5 fast touring tune with boost port and mbd 6 petal reed block
bgm 60mm crank with 3mm packer
dellorto 30mm open mouth
55pilot
266 av atomiser
140 main
40 slide
taffy pipe.......am i heading in right direction with jetting?
col68
registered user
Posts: 118
Joined: Sun Oct 30, 2011 9:36 am
Main scooter: lambretta s2 li225 ts1
Location: Spalding,lincolnshire
Contact:

you cant be far off , it the same jetting as my ts1 225 jetting . do some plug chops the will tell you . :bouncyeng:
User avatar
rapido230
registered user
Posts: 72
Joined: Thu May 24, 2012 9:14 am
Main scooter: vespa 210 & lambretta gp
Location: norwich
Contact:

thanks, spat a bit of fuel out and was way too rich, plug way black, gone down to a 264 av atomiser and even then gone down to leanest setting, seams quite crisp, ill do more plug chops
Eibar
registered user
Posts: 209
Joined: Fri Jan 09, 2009 8:33 pm
Main scooter: Eibar TS1 1966
Location: Liverpool
Contact:

u ain't said what needle your running,
my settings are

225 rapido (harry barlow transfers flowed better)

x7 p2.5
av266
55 pilot
118 main running open
18 degrees
PHBH and Nk Rally
Air fuel ratio is spot on
potato
User avatar
rapido230
registered user
Posts: 72
Joined: Thu May 24, 2012 9:14 am
Main scooter: vespa 210 & lambretta gp
Location: norwich
Contact:

flicking between x2 and x13 at moment , 2nd from top on x13 feels great and good plug colour, bearing in mind i still got bit running in to do lol
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 3 guests