Page 1 of 1

Li150 or jet200 gears for this engine?

Posted: Sat Apr 11, 2009 9:56 am
by ArKaTxU
Hi.
Who are the best gears for this engine?:
-Standard indian 200 stage4 from SR.
-22 dellorto carb.
-Sterling expansion exhaust.
and 16 stone 8-)

I have the possibility to put, or li150 early spanish (same italian ratio) or a jet200 one.
Li150 have 5.21 ratio, and the jet200 have 4.81.

Thanks!

Re: Li150 or jet200 gears for this engine?

Posted: Sat Apr 11, 2009 11:03 am
by corrado
The Li box with the Sterling exhaust or you will spend more time in 3rd gear, you will need a clubman for 4.8

Re: Li150 or jet200 gears for this engine?

Posted: Sat Apr 11, 2009 12:32 pm
by ArKaTxU
Perfect Martin!
Then i have the jet200 box for the RB20 project if the li150 that i have for the RB20 with the 47x16 (4,99) is not good.
I can use the jet200 box with this 47x16 (4,61) for a lower ratio, without change clutch sprocket, front sprocket and chain.
Thanks!

Re: Li150 or jet200 gears for this engine?

Posted: Mon Apr 13, 2009 6:52 pm
by corrado
My theory on final drive numbers is..................... the bigger the number, the bigger the smile on your face.
RB20 with 5.2 = big grin. :bouncyeng: