T5 172 reed valve 30mm Delly starting point !

[john.t5]

Mate had this built by Chequered past but the carb just seems to be as it was out of the box - it was actually the wrong 30mm for a Vespa but luckily I'd one on my GP for a swap.

Anyway, I was just looking a starting point for slide, needle, atomiser and main, it's a 55 idle in it which should be close. As the title, it's a 172, didn't have a good look at the manifold, not MB though, he's running a PM pipe.

Any help appreciated.

Cheers

John

[gimp1971]

1st thing he needs to do is get rid of the pipe

[john.t5]

Yeah? What do you recommend mate? He'll be gutted, nice shiny new chrome PM

And also any recommendations on the jetting?

[john.t5]

Nobody then??

[Yanker]

Mine ran 135 main, AV264 Atomizer, X2 needle (2nd or 3rd clip) 52 idle. 30mm PHBH, JL 'revvy' pipe.