I've got a problem with my carb it's leaking fuel between the body & the bowl, I've replaced the rubber o ring gasket, but its still weeping, it seems mainly concentrated around the corner beneath the mixture screw.
Any ideas ?
Cheers Dom.
30phbh leaking
-
shureimage
- registered user
- Posts: 60
- Joined: Fri May 20, 2011 1:30 pm
- Main scooter: SIL GP200
- Location: Windsor
- Contact:
-
shureimage
- registered user
- Posts: 60
- Joined: Fri May 20, 2011 1:30 pm
- Main scooter: SIL GP200
- Location: Windsor
- Contact:
The float bowl is held on with a single bolt underneath, oh & it's a plastic bowl.......
-
Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Wondered if it was, same as mine..have you replaced the small gasket on the main jet housing bolt which holds the bowl on and make sure when you have seated the o ring correctly with no bits in the groove. not much else that can go wrong really..shureimage wrote:The float bowl is held on with a single bolt underneath, oh & it's a plastic bowl.......
Ricspeed, gone but never forgotten RIP my friend #59