Hello,
A quick question regarding PK-fork in Rally frame:
I have this conversion-fork from SIP (based on the PK XL2 I believe):
http://www.sip-scootershop.com/EN/produ ... r_13347100
I want the Malossi RS24 shock.
Question is; do I need the standard length PK-one, or the shortened one (by Scooter and Service)?
Standard: https://shop.strato.de/epages/61438057. ... s/OL180040
Short: https://shop.strato.de/epages/61438057. ... s/SS200811
PKXL2 Fork in Rally200
-
Fruitjuice
- registered user
- Posts: 201
- Joined: Fri Jan 09, 2009 8:26 pm
- Location: Ghent, Belgium
- Contact:
The standard PK one will make the scooter sit a bit higher at the front, which in turn tends to make the stand a little too short so teh scooter sags to one side when on the stand.
I would go for the shortened version...
I would go for the shortened version...
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"