SIL Crank with Japanese big end bearing

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
User avatar
Special X
registered user
Posts: 407
Joined: Wed Jan 07, 2009 9:38 am
Main scooter: Lambretta 125 special 230cc
Location: Wakefield
Contact:
Contact Special X

Has anybody used one of these? How much power will they take.
Top
User avatar
TS1-200
registered user
Posts: 297
Joined: Thu Jan 08, 2009 1:19 am
Contact:
Contact TS1-200

About the same power as a standard Indie crank, but should last much longer,
Keep on keepin on
Top
nuttyboy
registered user
Posts: 52
Joined: Sat Jul 17, 2010 6:13 pm
Main scooter: lambretta
Contact:
Contact nuttyboy

have one sat in garage done 400 miles .gona put on ebay.?
Top
User avatar
corrado
Dealer
Posts: 2588
Joined: Thu Jan 08, 2009 1:12 am
Main scooter: Lambretta GP
Location: Top of Blackpool Tower
Contact:
Contact corrado

It'd be interesting to know exactly what bearing is used in these. I've had some Yam rods and bearings fitted to SIL cranks and the bearing fitted to the 115 rod was far cheaper than the RG500 bearing fitted to the 110 rod.
Top
Post Reply Previous topicNext topic

Return to “Lambretta Tech”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 8 guests

Powered by phpBB™ • Design by PlanetStyles