Page 1 of 1
TS1 iron liner
Posted: Mon Aug 15, 2011 9:26 am
by Shuggie
Looking for a wee bit of advice.
Got 2 TS1 cylinders that need replating/iron liner fitted. One's a 200 the other a 225.What are my options for iron liner? Like the idea of having a few rebores in case anything goes wrong!!
What are my options regarding pistons as std TS1 pistons don't come in oversizes? Not got a crank yet so happy to get a jap con rod.
Any suggestions?
Re: TS1 iron liner
Posted: Mon Aug 15, 2011 9:48 am
by Train Driver
Alan (Diablo)
07791220193
is dealing with these people for me
Fahron Engineering
Wighay Road
Hucknall
NG15 8AH
telephone 0115 963 4123
They will be putting a liner in my RT barrel
Re: TS1 iron liner
Posted: Mon Aug 15, 2011 10:03 am
by soullad
briefly, you might want to consider the Yam IT / DT piston for the 200 and the KX for the 225. Both offer oversizes if its the rebore / hone feature you're after.
Re: TS1 iron liner
Posted: Mon Aug 15, 2011 10:20 am
by Diablo
Steer well clear of PJME. Precision engineering it ain't
Re: TS1 iron liner
Posted: Mon Aug 15, 2011 10:40 am
by Shuggie
will i need to get the barrel re-worked to use the yamaha pistons or do the pistons need modified?
Re: TS1 iron liner
Posted: Mon Aug 15, 2011 3:50 pm
by Supereibar
Get a tuner to prepair the cylinder, piston & head assembly. I am sure they will be able to tell & also modify the piston accordingly. You people are so privileged to have so many good tuners at hand that know what they are doing.
A steel liner sounds great to me as everybody seems to talk marvels about them. Then just tune to taste.
J.