Model C - Knuckel joint issues

[Marc]

I finished my model c two month ago. After a couple of kilometers the rear knuckle joint started to leak grease when the engine has warmed up. This was the only part of the engine I haven't touched in the first place because somebody told me it's to difficult.
Does somebody know how to get the cogs out and if a special tool is needed?
There is a bit of casing missing where the rear engine bolt / brake bolt goes (see picture) is this standard or has the large cog been rubbing against the casing?

[RICSPEED]

cant see the pics mate

have a brouse in here -

http://www.forums.ilambretta.com/viewfo ... 4f7e767ffa

[jimmers]

cant see pics but recently took all mine apart to change bearingsseals and stuff in rear

may be able to help if i could see pics

cheers

[Marc]

trying to post the pictures again:









I think the seal between the gearbox and rear drive is gone, so when the engine gets hot the oil runs into the knuckle joint?!