mark wrote:beedspeed do advertise one but not 100% sure its the 4 wire single phase one you need,this is the one
Thanks Mark,I never give Dc a thought until I see posts on here looks a straight forward conversion ,I will be able do a digi speedo conversion when done
Dean
Re: 12V DC CONVERSION - HOW TO
Posted: Mon Jan 16, 2012 10:35 pm
by Bilko
Mark,
well pleased mate.
Hello Dean,
Get the one Mark suggests. Mine was from the Bay of E.
I tried the email you sent me for Ian, but I've heard nothing back. Hope I did it right.
Re: 12V DC CONVERSION - HOW TO
Posted: Mon Jan 16, 2012 10:39 pm
by Toddy
mark wrote:I have a long range tank on my s1 and have mounted my battery in space between rear mudguard and frame and my series 2 it's inside toolbox. I have always used a battery it only needs to be 4ah
Mark do you have any pics of your battery postions on your ser 1+2 ?
The schematic shows a regulator with yellow / brown / black as:
But it states AC system.
Sorry if its a stupid question, I am fine with the oily metal bits & bodywork, but i'm useless when it comes to anything thats likely to give me a belt ( and that includes the wife )
Re: 12V DC CONVERSION - HOW TO
Posted: Mon Jan 23, 2012 11:25 pm
by WINTERMODEL150
GBCS wrote:
Will this conversion work if the AF electronic kit is fitted ?
The schematic shows a regulator with yellow / brown / black as:
But it states AC system.
Sorry if its a stupid question, I am fine with the oily metal bits & bodywork, but i'm useless when it comes to anything thats likely to give me a belt ( and that includes the wife )
Hi,yes this will work with the AF/AC set up ,take the regulator off and fit the DC rectifier in its place and follow the wiring diagram as stated for DC conversions.
Dean
Re: 12V DC CONVERSION - HOW TO
Posted: Tue Jan 24, 2012 1:38 pm
by GBCS
Thanks for the input Dean.
Will I still need to move the wire on the stator ?
Re: 12V DC CONVERSION - HOW TO
Posted: Tue Jan 24, 2012 2:14 pm
by Muppet
Yes
Re: 12V DC CONVERSION - HOW TO
Posted: Tue Jan 24, 2012 2:16 pm
by mark
I would have thought so unless you already have a wire from each end of lighting coils. Put a pic of f stator up
Re: 12V DC CONVERSION - HOW TO
Posted: Wed Feb 01, 2012 5:37 pm
by GBCS
I now have all the bits to do the conversion, so I am planning on having a go at it at the weekend ( i will post pics of the stator ).
Does anyone know what size wire I need to feed in to the battery ?
)