Page 70 of 76
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Mon Sep 14, 2015 7:13 pm
by mark1
Cheers for the reply ron, I'll have a play around with it. Hopefully I can find a good set up using the 266.
It's a fantastic kit, I absolutely love riding it. Hopefully I won't bugger it up
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Oct 04, 2015 8:27 pm
by Rick
Just had a tear up with a mate on the country lannes on my Avanti and it seem to be running rather well.. The top speed GPS was 82.9 which is 7mph faster at that spot than when running 4.6 gearing... I'm pretty chuffed considering this is a off the shelf barrel:-)
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Oct 04, 2015 9:18 pm
by Jonhunter
Hi Rick,
What gearing you got now?
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Oct 04, 2015 9:21 pm
by mick1
Rick wrote:Just had a tear up with a mate on the country lannes on my Avanti and it seem to be running rather well.. The top speed GPS was 82.9 which is 7mph faster at that spot than when running 4.6 gearing... I'm pretty chuffed considering this is a off the shelf barrel:-)
What carb and exhaust is fitted ?
Had 80 mph + with the 35 TMX Mikuni and Franspeed Race with 4:8.1 gearing
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Oct 04, 2015 9:40 pm
by Jazzy
That's impressive
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Oct 04, 2015 10:08 pm
by Rick
30mil carb, 4.8 final drive, 130 main, X13 top clip and a super tourer... I found 4.6 hard work some don't
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Oct 04, 2015 10:15 pm
by Rick
The speed was tacken with a phone app so it could be wrong but the distance was spot on. My mate was on a 25bhp+ TS1 and I don't think he was gonna catch up
My bike puts out about 21bhp or did....
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Oct 04, 2015 11:16 pm
by Jazzy
As Adam would say, all the parts of an engine working together.
a pipe is only as good as the gearing you run with it and visa versa.
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Mon Oct 05, 2015 2:50 am
by CANbus
mick1 wrote:Rick wrote:Just had a tear up with a mate on the country lannes on my Avanti and it seem to be running rather well.. The top speed GPS was 82.9 which is 7mph faster at that spot than when running 4.6 gearing... I'm pretty chuffed considering this is a off the shelf barrel:-)
What carb and exhaust is fitted ?
Had 80 mph + with the 35 TMX Mikuni and Franspeed Race with 4:8.1 gearing
Hi mick1
What jetting do you have? Apologies if you have already posted in this super long thread.
I'm considering blowing the cobwebs off mine and trying a TMX35
Thx
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Mon Oct 05, 2015 8:19 am
by mick1
CANbus:
25 PJ
57 needle (not sure which clip but think top ?)
290 MJ
Breathsweet filter
The Mikuni makes a massive difference to the 30mm PHBH that was on, more responsive and more top end, completely transformed the performance.
been on 2 x dynos. One got 22.8 hp the other was 21.7 hp. The lower one was a freebie at the York SC do and he only took it to 7k rev's (I've had to 7.5k on the road)