Page 6 of 76
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Fri Dec 23, 2011 8:18 am
by mick1
Disagree, let's see a documented process of achieving the maximum from the kit and what it involves. The different stages and potentail problems are a good source of information
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Fri Dec 23, 2011 7:44 pm
by sean brady scooters
big thanks to martin (corrado ) for loaning us and bringing over the following for testing
AF big bore clubman
Franspeed road
AF NK road
Adpeed /chisel tourer
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Fri Dec 23, 2011 10:23 pm
by drunkmunkey6969
sean brady scooters wrote:big thanks to martin (corrado ) for loaning us and bringing over the following for testing
AF big bore clubman
Franspeed road
AF NK road
Adpeed /chisel tourer
Sorry i missed you Martin, will catch up next time....
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Fri Dec 23, 2011 11:40 pm
by ArKaTxU
sean brady scooters wrote:big thanks to martin (corrado ) for loaning us and bringing over the following for testing
AF big bore clubman
Franspeed road
AF NK road
Adpeed /chisel tourer
Adspeed/Chisel tourer = ADS3?
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sat Dec 24, 2011 2:45 am
by corrado
ArKaTxU wrote:
Adspeed/Chisel tourer = ADS3?
Yes.
I've got high hopes for it, mated with TV gearing, as a motorway mile muncher.
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sat Dec 24, 2011 9:32 am
by OAP
Will need to go higher than 4.45:1, I will be trying 4.12:1 with that pipe
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sat Dec 24, 2011 12:14 pm
by bubbles
i know of a nice gp & s2 you can try it on ron
Merry Christmas see you in the new year im off on the p155 ...........
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sat Dec 31, 2011 11:59 pm
by CANbus
Any plans to try a reed valve with this kit?
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Jan 01, 2012 3:07 am
by RICSPEED
i would not think so in the immediate future until the kit has got some miles under it
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Posted: Sun Jan 01, 2012 1:28 pm
by Andy Pickering
CANbus wrote:Any plans to try a reed valve with this kit?
Me and Sean mentioned it a few weeks ago, you never know what future mods this kit on my scooter will have thrust upon it...
