Scooterotica

And the suggested wiring for a trickle charge battery with AC lighting is




Sent from my iPhone using Tapatalk

I don't see why the two yellows couldn't be plugged into a podtronics / wassell type rectifier and the output used to feed the loom and battery.

rosscla wrote:I don't see why the two yellows couldn't be plugged into a podtronics / wassell type rectifier and the output used to feed the loom and battery.

That is what I was hoping (Like the look and the provenance of the components provided they have not been moved 'Eastwards' to an un=proven supplier yet again Piaggio!)

There's no sign of any Markings on any of the parts except the flywheel and backplate.

Couple other pics






Sent from my iPhone using Tapatalk

At a glance: tkx for the pictures rosscla!

I could be wrong but I THINK most bike stators are 3 phase, Wassel do a 3 phase version of their DC regulators but I don't know the wiring configuration.

Ive got a 3phase electrex running through a single phase wassel, just connevted the two yellow wires to thr two yellow on the wassel .
My electrex us 5years old and from memory the wires are slightly differen to what's pictered before.
My wireing diagram had the one yellow conected to the reg/rect and the othe yellow earthed ...........same as what you would need to do to a wassel converted stator if you decided to run it through a normal vepsa style reg .