Re: New engine mounts - vibration.
Posted: Wed May 11, 2011 11:47 pm
i fitted those crappy 2 hole indian ones in my standard sx200 a year ago . the kickstart side had totally collapsed but still no vibration to mention .
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
New engine mounts - vibration.
Page 2 of 2
Re: New engine mounts - vibration.
Posted: Thu May 12, 2011 3:16 pm
I had two Casa ones go on tow different motors . Asked the Casa rep and was told the Casa ones are/were not designed for tuned motors, but were for stock motors only. Was offered two for one, so next time a standard motor rebuild comes up, in they'll go.
Re: New engine mounts - vibration.
Posted: Fri May 13, 2011 8:32 pm
I bought the Casa solid mounts (no holes) and my fillings fell out 
So I drilled the 3 holes in the rubber with an M8 bit and been liveable since if thats possible on a TS1 :biggrin:
So I drilled the 3 holes in the rubber with an M8 bit and been liveable since if thats possible on a TS1 :biggrin: