Scooterotica

Bit of a rush job really empty the boxes of bits ,paint them replace a few bits then build,then hit a few hurdels ,mot,then register then scarborough well that was the plan .

Did we say spanish leggies series 2 DONT have those captive areas ?

i have a solution


have a counter sink bolt under the runner nearest the fixing on the inside of guard
and runn a bracket with a nut weled to it in the required poistion ....do you follow ???

MAB wrote:Bit of a rush job really empty the boxes of bits ,paint them replace a few bits then build,then hit a few hurdels ,mot,then register then scarborough well that was the plan .

Did we say Spanish leggies series 2 DONT have those captive areas ?

yes ...as the eibar series 2 has a turning mudguard they dont need them

Now that sounds like a plan , i will give it a go tomorrow night and keep you posted thanks for all your help its really appreciated.

Mark

I take paypal

What a service Ricspeed thats spot on thanks again mate your a star .

Forever grateful

Mark

you will need to pull counter sink bolt through to form a flare in the pannel work(like gp leggies) and use a bit of tube to space it out