Iv cut vents into the rear of my panels and want to put some additional rear lights in them behind the wire grills im puting in. Ideally looking for lights that work on both rear light and brake. They will need to be quite small and have a connector on the back so i can disconnect them when taking the panels off. Im thinking LED or similar? I am running 12v without a battery.
Cheers
sef
Rear lights
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
need some easy to disconnect connectors as wellrbgaz wrote:av look in halfords sef they do allsorts 12v led stuff
- essexgp
- registered user
- Posts: 287
- Joined: Wed Jan 07, 2009 6:16 pm
- Main scooter: Indian Gp200 Indian Gp Cutdown
- Location: Canvey Island
- Contact:
I think this would work for what you are wanting to do
http://www.maplin.co.uk/Module.aspx?Mod ... connectors

http://www.maplin.co.uk/Module.aspx?Mod ... connectors


-
- registered user
- Posts: 55
- Joined: Sat Jan 30, 2010 4:55 pm
- Main scooter: LI ser3 125 {TS1 230} 1963
- Location: tiptree,essex
- Contact:
hi, you could modify the led stop and brake light unit thats already available for lammys, if your handy with a soldering iron and a bit of fettling,buy the whole unit and you will have everything you need.
how much!!!
-
- Dealer
- Posts: 957
- Joined: Sun Jan 11, 2009 12:49 am
- Main scooter: GP
- Location: Ipswich
- Contact:
Sef,
You can pop over to mine (A12, south of Ipswich) and see some conenctors I have in stock, along with cables, terminals, tools and my own versions of LED lights that I have fitted to the Abarth.
You can pop over to mine (A12, south of Ipswich) and see some conenctors I have in stock, along with cables, terminals, tools and my own versions of LED lights that I have fitted to the Abarth.
Martin
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
Mart, how about i pop over to yours with a some cash pick what i want and then have a cup of tea while you fit it for me...Knowledge wrote:Sef,
You can pop over to mine (A12, south of Ipswich) and see some conenctors I have in stock, along with cables, terminals, tools and my own versions of LED lights that I have fitted to the Abarth.

You know it makes sense....

-
- Dealer
- Posts: 957
- Joined: Sun Jan 11, 2009 12:49 am
- Main scooter: GP
- Location: Ipswich
- Contact:
OK, I'm (probably) up for that, but I don't have any lights to fit, only examples of what you could buy to suit your own requirements.
You don't want a battery, but LED's will not work at their best on AC power alone.
You don't want a battery, but LED's will not work at their best on AC power alone.
Martin