I am currently getting together all of the bits needed to restore my Series 2 that I recently bought.
I have only done series 3's before so I am learning the slight differences between the models as I go along.
Were drip trays fitted to Series 2's as standard and are there any other differences I should be aware of when buying bits?
Cheers
Drip
-
onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
apart from body work/stand everything elce can be interchanged between series 1/2/3
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
Cheers.
Any ideas on the drip tray and felt? I might add one anyway just to protect my tank from spills.
I've heard that Li125's have metal front floor runners- was this on all 125 s1 and 2's? And also I've seen some speedo faces with li125 on them and some without?
Any ideas on the drip tray and felt? I might add one anyway just to protect my tank from spills.
I've heard that Li125's have metal front floor runners- was this on all 125 s1 and 2's? And also I've seen some speedo faces with li125 on them and some without?
as far as i know on s1 at least metal runners 125 with rubber inserts on 150
as for speedo ..no idea ...mine just has innocenti mark and goes up to 60mph
as for speedo ..no idea ...mine just has innocenti mark and goes up to 60mph
Its in bits scooter club: www.facebook.com/groups/132415046859320