cast iron barrel to piston clearance
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
are we all still agreed on 4 thou for a rebore
i go with that on my sil 200's cos i dont do running in 
but go with 3.5 thou on ally barrels
but go with 3.5 thou on ally barrels-
dirtyhandslopez
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
I still go 3 thou...but, I also put a cople of hundred miles on each motor before it goes out the door, don't want them pesky customers ruining all that hard work 
That's not going anywhere...