Im trying to find a half size rear mudguard for the cutdown im building. Found this one online at Beedspeeds
http://beedspeed.com/product_info.php?products_id=1296
Ordered it but they no longer do it even though it shows up in their online catalogue. Does anyone know where I can get one like this or something similar?
Rear mudguard for a cutdown
-
newmanlammy
- Dealer
- Posts: 118
- Joined: Fri May 08, 2009 12:51 pm
- Main scooter: Animal worldwide freeride
- Location: chesterfield
- Contact:
trailer mudguard for 10" wheels, £5 towsure etc
-
red
- registered user
- Posts: 637
- Joined: Thu Jan 15, 2009 8:40 pm
- Main scooter: Scomadi TL 250 (Ltd Ed No.3)
- Location: Blyton,Lincolnshire
- Contact:
Nowt new there then with Beedys,essexgp wrote:Im trying to find a half size rear mudguard for the cutdown im building. Found this one online at Beedspeeds
http://beedspeed.com/product_info.php?products_id=1296
Ordered it but they no longer do it even though it shows up in their online catalogue. Does anyone know where I can get one like this or something similar?
I rang them up once and asked about a load of stuff I wanted so i drove over as I'm only about 30 mins away,when I got there they hadn't got the stuff and denied saying they had.Also another time I bought a new rear hub and all the studs sheared on it after about 500 miles,took it back and was told that they're not built for TS1's so what did I expect.No refund,exchange or nowt.
Don't use them now
He used to be good in the 80's and early 90's but gone downhill rapidly
I do not try to explain why I ride Lambrettas,
For those who understand, no explanation is necessary,
For those who don't, no explantion is possible.
For those who understand, no explanation is necessary,
For those who don't, no explantion is possible.
-
vesbrettas
- registered user
- Posts: 55
- Joined: Tue Jun 09, 2009 2:33 pm
- Contact:
might be better with an 8" trailer muguard as the seem to fit the tyre size well as trailers got bigger profile tyres, i only say that cos the when building my series 6 the 10" one was to big
-
newmanlammy
- Dealer
- Posts: 118
- Joined: Fri May 08, 2009 12:51 pm
- Main scooter: Animal worldwide freeride
- Location: chesterfield
- Contact:
sorry meant 8" wheel mudguard not 10", photos below were from one of these. I actually made three cutdown mudguards from one steel blank for a fiver from towsure.
-
essexgp
- registered user
- Posts: 287
- Joined: Wed Jan 07, 2009 6:16 pm
- Main scooter: Indian Gp200 Indian Gp Cutdown
- Location: Canvey Island
- Contact:
Thanks for the pictures and advice (by the way nice cutdown but wheres the rear light going?) have ordered from Towsure but had to order a pair so looks like might be putting one on evilbay lol 
-
Supereibar
- registered user
- Posts: 811
- Joined: Sat Jan 17, 2009 9:17 pm
- Location: Barcelona, ESPAÑA
- Contact:
Hello pal, if you cant find anything, I have an original Lambretta one you can have. Will be making a shipment to essex sometime soon.. If you are interested of course.