Cables/Loom through Frame

[Wee Mark]

Evening Gents.....Any advice/ pics/info/comments about routeing the cables and loom through the frame, its a Cutdown Series 3 LI 150 frame with Beedspeed drops running TS1 kit..... all help welcome please...

[essexgp]

I was hoping you were going to get a reply on this as ive got to do my gp cutdown at some point soon

[mark]

any use?
http://scooterotica.org/forum/viewtopic ... lit=cables

[Wayne Miller]

I got told that the best way to get your cables through the loop was to tie a knot in a piece of string and whilst holding the other end of the string blast it through the frame loop using an air hose from a compressor. Then tie your cable to the string securely and pull it through. I havent tried it myself but in theory it could work

[RICSPEED]

I got told that the best way to get your cables through the loop was to tie a knot in a piece of string and whilst holding the other end of the string blast it through the frame loop using an air hose from a compressor. Then tie your cable to the string securely and pull it through. I havent tried it myself but in theory it could work

thats how they did it on american chopper

[Wayne Miller]

thats how they did it on american chopper

Fook me that was quick! do you think he read my post?

[RICSPEED]

no idea

[Wee Mark]

Thanks lads, got a reply as well on the L.C.G.B site that said that the Mig type welding rods can be used to pull them through as well