Mikuni - where's mi nipple adjustment - ooh er missus

[joolz]

Evening chaps

I'm about to go into tinker mode (well next weekend) ..... new clutch, expansion, carb etc

Anyway re the carb...

I have a Mikuni copy to nail on.... it has come with an inner throttle cable.
Now all my Lambos have had Delorto/Jettex carbs where the adjustable nipple is at the carb end.
The Mikuni has the fixed nipple at the carb (AFAIK)

Sooooo.... can you get adjustable nipples at the throttle end and if so where from???

Or am I missing summat?

Thanks guys

Julian

[mark]

http://www.scooterrestorations.com/lamb ... er-nipple/

[joolz]

http://www.scooterrestorations.com/lamb ... er-nipple/

Yer a bloody star Mark

AND

My local dealer too

Thanks

So I guess you snip off the excess???

Anyway, trip to Notts in the morning

[mark]

yes i normally snip it then solder up the end

[joolz]

yes i normally snip it then solder up the end

Top tip that man

Top tip

Thanks

[byron]

yes i normally snip it then solder up the end

and, with an old brass pulley, leave enough spare to fit a spare nipple on the end.
it does also help to have some cable adjustment at the carb end, so maybe use an elbow with screw in adjuster ?

[joolz]

yes i normally snip it then solder up the end

and, with an old brass pulley, leave enough spare to fit a spare nipple on the end.
it does also help to have some cable adjustment at the carb end, so maybe use an elbow with screw in adjuster ?

Bloody hell........... another top tip (or two)

Was wondering about the adjustment....

Will deffo take all this on board

Many thanx

J