electrics, light rim earth
-
Suede Ed
- registered user
- Posts: 221
- Joined: Tue Jan 13, 2009 2:01 pm
- Main scooter: SIL GP200
- Location: Black Country
- Contact:
Indian GP rebuild nearing the end !. Two questions gents; I have a light lens that seems slightly too small for the chrome rim, it has 'brytax' stamped on it. Is it too small because it's for an italian headset? And I have wired the machine using a MB simplified loom and I can't workout how the headlamp bulb is earthed, is it linked somehow to the light rim?
-
Toddy
- registered user
- Posts: 6242
- Joined: Sun Mar 08, 2009 12:01 am
- Main scooter: Lambretta Series 1
- Location: East Yorkshire
- Contact:
2nd question Headlight bulbs are usually earthed from the adjuster screw at the bottom of the rim to the headlight block , i always put a seperate earth on direct from the block to the headset bottom .Suede Ed wrote:Indian GP rebuild nearing the end !. Two questions gents; I have a light lens that seems slightly too small for the chrome rim, it has 'brytax' stamped on it. Is it too small because it's for an italian headset? And I have wired the machine using a MB simplified loom and I can't workout how the headlamp bulb is earthed, is it linked somehow to the light rim?
As my Dad used to say "Each to their own lad"
-
Suede Ed
- registered user
- Posts: 221
- Joined: Tue Jan 13, 2009 2:01 pm
- Main scooter: SIL GP200
- Location: Black Country
- Contact:
Cheers Toddy, looked again this morning, the main bulb earths thru the tab that touches the side of the bulb then joins a terminal that could be earthed with a ring terminal to the throttle stirrup. And the rim does fit the light, its indian and obviously I had to bend the rim to make it fit, der! I was tired 