Maybe someone on here can help me! anyone know what the gap should be between the fork links when fitted? I.E the gap where the hub should fit. I ask because I've been sold a set of links, fitted them but find the gap is too narrow to fit my front hub. The gap measures 4 & 3quarter inches between the hooks. Just want to arm myself with info before I contact the supplier.
Also is it possible to fit gp type links (with coorect rods & balls) to LI/SX type forks? I ask because I have a set lying about.
Thanks in advance
Jon
LI3 Forks
its often nessesery to push the links apart to get the hub in check u have the correct hub nuts on some are wider then others the measurment between the forks is what you need to measure really as a base line then see if one of the links is bent yes gp links will fit
in a li set of forkw with the correct rods and ball bearing
the 4 sets of forks i have measure between 130-134mm between the link bolt washer on the forks
one set with fitted links measures 130 ish between the link faces the hubs i have measure 128 and 130mm on the outside of the nuts which hold the hub together
in a li set of forkw with the correct rods and ball bearing
the 4 sets of forks i have measure between 130-134mm between the link bolt washer on the forks
one set with fitted links measures 130 ish between the link faces the hubs i have measure 128 and 130mm on the outside of the nuts which hold the hub together
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm