Hydrolic clutch
Cs engineering does the best fully hydaulic one in my opinion or you can drill and tap a Kawasaki one onto the side casing , someone was doing a bebo mini bike stye conversion i think.
-
Fux
- registered user
- Posts: 501
- Joined: Mon Aug 17, 2009 9:42 pm
- Main scooter: li150 S2
- Location: Norway
- Contact:
I know CS do some sweet ones, but I was hoping to find something a little cheeper. I can`t remember the exact price but they are $$$$$$ .mark wrote:Cs engineering does the best fully hydaulic one in my opinion or you can drill and tap a Kawasaki one onto the side casing , someone was doing a bebo mini bike stye conversion i think.
there was one on ebay a few weeks ago that used a minimoto /auto parts need some welding on the handle bar mount to accept the speed flight master cylinder bottom looked like this one that i used
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
Steve, what would thre resultant clutch action be like with say a 5 plate clutch with competion spings in?shocky wrote:there was one on ebay a few weeks ago that used a minimoto /auto parts need some welding on the handle bar mount to accept the speed flight master cylinder bottom looked like this one that i used
i dont know col mine was light enough though took a bit of fiddling to get it right the main prob was locating the bit in the pic as it couldnt be muonted straight couse the cable adjuster bracket was in the way i ended up makeing a new adjuster bracket with a longer tab on to take this i got a pic some were
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
I'd be interested to see it if you come across itshocky wrote:i dont know col mine was light enough though took a bit of fiddling to get it right the main prob was locating the bit in the pic as it couldnt be muonted straight couse the cable adjuster bracket was in the way i ended up makeing a new adjuster bracket with a longer tab on to take this i got a pic some were
cheers
colin
i use one of those on my cutdown works fine
i have 2 of them left
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm