60mm crank with monza/ts1 for torque?

[mickdale]

starting building an engine with a mec 60mm crank and after torque rather than high revs/peaky hp

was thinking along the lines of a manza or ts1

should i leave the kits as standard or is there anything i could do to increase ridability?
(havent decided on pipe)

cheers
mick

or is classic rapido/tm24/ancilotti the way to go

[sean brady scooters]

you could do far worse than the ts1 with 1mm off bottom of barrel as per MB,s touring tune..........

[mickdale]

can you still take 1mm from the base of the cylinder with a 60mm crank?

cheers
mick