Franspeed
-
eibargum
- registered user
- Posts: 368
- Joined: Wed Jan 07, 2009 6:38 pm
- Main scooter: Vespa PX210 Polini
- Contact:
RB spain, are you sure you mean race tour, race tour is usully a term used by MBD for some of thier own products, i use the franspeed tourer on my RB and some lads use the franspeed race, ive had a look on andys site and i cant see anything he makes inbetween the 2.
-
RB Spain
- registered user
- Posts: 30
- Joined: Sat Oct 31, 2009 4:26 pm
- Location: Callahonda Spain
- Contact:
Hi Eibargum, its the road tour i am looking to get, just needed to know if there are any good resaults.eibargum wrote:RB spain, are you sure you mean race tour, race tour is usully a term used by MBD for some of thier own products, i use the franspeed tourer on my RB and some lads use the franspeed race, ive had a look on andys site and i cant see anything he makes inbetween the 2.
-
corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
I think the 'Tour' produces it's peak about 500 rpm lower in the rev range and also picks up about 500 rpm earlier, it's the better all rounder of the 2.
I'm building 2 RB20s, I'll be using a Dellorto VSHB 34 and using the Franspeed 'Race' pipe as a race bike, the other one will be for road use with Mikuni TMX27 and Franspeed 'Tour' pipe.
If I remember correctly when they did the exhaust comparison tests in Scootering a while back that the Franspeed Race was the test winner, not sure if the 'Tour' pipe had been developed at that stage. The Tour will pull slightly taller gearing because it produces power lower in the rev range.
I'm building 2 RB20s, I'll be using a Dellorto VSHB 34 and using the Franspeed 'Race' pipe as a race bike, the other one will be for road use with Mikuni TMX27 and Franspeed 'Tour' pipe.
If I remember correctly when they did the exhaust comparison tests in Scootering a while back that the Franspeed Race was the test winner, not sure if the 'Tour' pipe had been developed at that stage. The Tour will pull slightly taller gearing because it produces power lower in the rev range.
-
RB Spain
- registered user
- Posts: 30
- Joined: Sat Oct 31, 2009 4:26 pm
- Location: Callahonda Spain
- Contact:
thats the one ,this is what i needed know ,thanks corrado, your a great help,corrado wrote:I think the 'Tour' produces it's peak about 500 rpm lower in the rev range and also picks up about 500 rpm earlier, it's the better all rounder of the 2.
I'm building 2 RB20s, I'll be using a Dellorto VSHB 34 and using the Franspeed 'Race' pipe as a race bike, the other one will be for road use with Mikuni TMX27 and Franspeed 'Tour' pipe.
If I remember correctly when they did the exhaust comparison tests in Scootering a while back that the Franspeed Race was the test winner, not sure if the 'Tour' pipe had been developed at that stage. The Tour will pull slightly taller gearing because it produces power lower in the rev range.
