serveta monky bike Pipe

[Lazarus]

Hi
Im trying to find out some info about a sports pipe made for a serveta 200 on a monky bike called the Pony.
has any one got any photos of this pipe or know if they would fit a full bodied s3 Lammy

[storkfoot]

There have been several of these pipes knocking around over the years since Serveta bit the dust. Not sure I've ever seen one actually fitted up. I think they come out the wrong side and would take a fair amount of work to get to fit on a full frame.

I suspect most people have looked at them and thought it would be too much trouble. If you get hold of one, and give it a go, good luck to you

[Soulpunk]

i think storkfoot is talking about the very late amiga-pipes which the orbar (late serveta) factory ordered from a manufacturer in 1989. theyordered several 100´s but used just ten pipes for their amiga-prototype-scooters (125 / 200).
some 100 of these pipes have been around since then and a big stock got discovered in the middle of the 90s. scooter center cologne and bedlam i think sold these pipes
(without fittings / adaptor).


best would be to contact the lambretta club eibar via the net. they have some ponys and stuff / museum in their club, so they could give you adresses where to get a pipe (nos or used).

[carlos fandango]

Is it one of these?
http://cgi.ebay.co.uk/LAMBRETTA-PONY-EX ... _500wt_956

[david]

[bristolmod]

I like that bike- where can I get one?

South America seems to ring a bell

Chris

[RICSPEED]

Is it one of these?
http://cgi.ebay.co.uk/LAMBRETTA-PONY-EX ... _500wt_956

that one will be the amiga pipe

[Stokie]

Ricspeed is right the ebay exhaust is the Amiga pipe - I've got one just the same.
They're designed to bolt to the underside of the ag housing so anyone using one would need to fabricate some kind of bracket to secure it or find one of the NOS Amigamag housings that were knocking around a while back.
You'd expect 'Disco Dez' to know what he was talking about - tut tut

[red ghost]

Me wantee!!!.... That's flippin' sweet!

And how nice would a twin be..

[RICSPEED]

there was a home built job in scootering a few years back that was very simerler called a broetta (brown being his surname) he had built it in the seventies and had kept since