Scooter theme based on the Captain America chopper from the film Easy Rider.....
Captain America - Easy Rider....
-
drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
....another stunning scoot cut, chopped, raked, and painted by Sean Brady @ Scooterotica. Watch out for this one at Brid this weekend in the custom show.........
Scooter theme based on the Captain America chopper from the film Easy Rider.....
Scooter theme based on the Captain America chopper from the film Easy Rider.....
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
1st prize for best chop at BRID .... 
Sean Brady Scooters - 01765 690 698
-
muttonjeff
- registered user
- Posts: 31
- Joined: Sat Jan 10, 2009 6:06 pm
- Contact:
Brilliant effort sean!!!!!
Have you got the dyno charts for it??
Have you got the dyno charts for it??
congratulations!!!!!!!!
-----Besa Boga Scooter Alliance-----
-----------Reggio Emilia----------
--------------Italy---------------
http://www.facebook.com/home.php?#/besa ... ef=profile
-----------Reggio Emilia----------
--------------Italy---------------
http://www.facebook.com/home.php?#/besa ... ef=profile
Well done!! Got a port map for it please? 
Sponsors: Performance Tuning. Ve Uk. Scooter Center Koln. LTH . DRT
Got any dope hidden in the fuel tank?
-
sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
MUTTONJEFF/TONY.....
funnily enough,Dyno results and port maps will be available soon..
I built and tuned the engine approx 3 years ago.
Its an indian cast iron 200,STAGE 5,ported casings ,original DJ pipe,30mm carb.
Its done a good few thou miles so far,but its coming in for a dyno and set up because Ian the owner has just fitted a retro style 30mm VHB delly (which was kindly rebuilt and converted by "KNOWLEDGE",as it was a four stroke one ).
Thats IF we can get it on the dyno.....as the scoot is something like 7 1/2 foot long..
funnily enough,Dyno results and port maps will be available soon..
I built and tuned the engine approx 3 years ago.
Its an indian cast iron 200,STAGE 5,ported casings ,original DJ pipe,30mm carb.
Its done a good few thou miles so far,but its coming in for a dyno and set up because Ian the owner has just fitted a retro style 30mm VHB delly (which was kindly rebuilt and converted by "KNOWLEDGE",as it was a four stroke one ).
Thats IF we can get it on the dyno.....as the scoot is something like 7 1/2 foot long..
Sean Brady Scooters - 01765 690 698
-
Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
PMSL..muttonjeff wrote:Brilliant effort sean!!!!!
Have you got the dyno charts for it??
Ricspeed, gone but never forgotten RIP my friend #59