Bear in mind i'm looking at a tourer type engine, running gp 200 gearbox on 4.8 ratio and jl3 with a vhsh 30mm delly flatslide and sil flywheel lightened to around 2kg.
Cheers Baz
What crank
-
bazman
- registered user
- Posts: 578
- Joined: Wed Jan 07, 2009 9:02 am
- Playstation gamer tag: bazman70
- Location: Annan S.W. Scotland
- Contact:
on a ts1 225, building another engine , have a 58 mm indian webs with uprated bearing and rod, or maybe a mec 60mm.
Bear in mind i'm looking at a tourer type engine, running gp 200 gearbox on 4.8 ratio and jl3 with a vhsh 30mm delly flatslide and sil flywheel lightened to around 2kg.
Cheers Baz
Bear in mind i'm looking at a tourer type engine, running gp 200 gearbox on 4.8 ratio and jl3 with a vhsh 30mm delly flatslide and sil flywheel lightened to around 2kg.
Cheers Baz
-
Train Driver
- registered user
- Posts: 604
- Joined: Wed Mar 11, 2009 11:32 am
- Location: PE31 8PT (Posh bit of Norfolk)
- Contact:
60mm seems the choice of some but i say go for that extra cc and TORQUE and get a 62mm,
plenty of them out there, replay scooters, Jb, Mb they all have them
plenty of them out there, replay scooters, Jb, Mb they all have them
TS1 and PX stay in the garage (future barn finds) out on the GTS 300 when I go out on a scooter.
I know I’ll get there and back
I know I’ll get there and back
I take it the use of extra gaskets, packer plates are used ? Also will it affect the port timings , ie for the better or worse? 
-
- Information
-
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot], Semrush [Bot] and 17 guests