Hey all
So renovation of my NSU Prima D is coming on well all stripped down engine un-seized and with the garage being cleaned and checked.
Frame all sanded down and resprayed just waiting for engine to get back and can can’t rebuilding.
I do have a couple of questions:
I have a Draper grease gun but I can’t seem to find a connector or collection of connectors to convert the gun to the grease nipples. The grease gun is this one: https://www.toolstation.com/draper-14-a ... gun/p41605
And I have attached a picture of one of the grease nipples
Also what grease would be recommended for the forks bearings and steering bearings?
Sent from my iPhone using Tapatalk
NSU Prima D
-
OliverCiaravella
- registered user
- Posts: 14
- Joined: Sun Mar 14, 2021 10:21 pm
- Main scooter: NSU Prima D
- Contact:
-
OliverCiaravella
- registered user
- Posts: 14
- Joined: Sun Mar 14, 2021 10:21 pm
- Main scooter: NSU Prima D
- Contact:
Picture didn’t attach
Sent from my iPhone using Tapatalk
-
storkfoot
- registered user
- Posts: 1154
- Joined: Thu Jan 08, 2009 12:08 am
- Main scooter: '70 GP150 [TS1 225]
- Location: Merseyside
- Contact:
I am unfamiliar with the grease gun you refer to. Many years ago, I bought an antique grease gun for not much money. I have just done a search and you can still pick up similar for not much money. I have never had an issue with it fitting Lambrett grease nipples which, I would guess are a very similar size.