Exhaust set up

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Geocamper
registered user
Posts: 107
Joined: Sun Jan 26, 2014 11:30 pm
Main scooter: Tv175 S2- Li 150 S2 Eibar
Contact:

Running a standard tv175 with the original MB21 BS5 carb.
The question I have is,
Could I fit a BGM V4 exhaust and a SH1/20 carburettor onto this engine with positive effect? Would the engine be underpowered for this set up?
Lamaddict
registered user
Posts: 854
Joined: Wed Jan 07, 2009 8:35 pm
Contact:

I've put a clubman on standard TV175 engine and it was worse all round, rather than using standard exhaust. Read the Scootering article, basically if any engine isn't doing more than 5/6k revs use a standard exhaust.
Geocamper
registered user
Posts: 107
Joined: Sun Jan 26, 2014 11:30 pm
Main scooter: Tv175 S2- Li 150 S2 Eibar
Contact:

Cheers Lamaddict. I'm currently using the original set up including exhaust. I just feel the Lambretta is holding back power due to the set up. The top end has recently been rebuilt and new bearings and seals in the case. Now it's all bedded in I feel the scoot can push out more power.
Timbo
registered user
Posts: 1276
Joined: Tue Mar 03, 2009 2:46 pm
Main scooter: SX200 and GP230 RT
Location: Luton area.....
Contact:

I’d say the bgm4 will make a big difference...
storkfoot
registered user
Posts: 1154
Joined: Thu Jan 08, 2009 12:08 am
Main scooter: '70 GP150 [TS1 225]
Location: Merseyside
Contact:

I'd say, see if you can borrow one to try first.

Gut feel tells me it'll give you more top end speed but may make it less enjoyable to ride around town.

£240 is a lot to spend when it may just go on the shelf in the garage after a couple of weeks.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 12 guests