Unsafe parts.
-
HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
Do they give a torque setting for the large centre nut,because it loooks as if it wasn't tightened enough and has come loose causing the hub to rock on the splines putting pressure on the nut and causing it to damage the lock ring.
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
also 50nm is only 36fbt when we are normally 120fbt on rear wheel
-
Fux
- registered user
- Posts: 501
- Joined: Mon Aug 17, 2009 9:42 pm
- Main scooter: li150 S2
- Location: Norway
- Contact:
I deleted the pics.
It looks like we all have no Idea as to what went wrong here, but I have an expert on the case now.
If my expert cant find an explination this will suddenly spring to life again.
It looks like we all have no Idea as to what went wrong here, but I have an expert on the case now.
If my expert cant find an explination this will suddenly spring to life again.
-
fluff34567
- registered user
- Posts: 388
- Joined: Tue Dec 20, 2016 2:27 pm
- Location: Switzerland
- Contact:
120ftlb? Must admit I haven't got to that stage on my build but seems rather excessive.garry inglis wrote:also 50nm is only 36fbt when we are normally 120fbt on rear wheel