Hi guys,
I was trying to fit a new kick lever on my 125 special (bought a spaq one), and the kick doesn't go all the way to the bumper but stops 1cm below the rubber...
And if I change the position it's too high...
hope I'm clear enough (not a native English .
Does someone has an idea ?
Kick lever doesn't reach the bumper
-
- registered user
- Posts: 14
- Joined: Wed Feb 08, 2017 2:29 pm
- Main scooter: 125 Special
- Contact:
-
- registered user
- Posts: 14
- Joined: Wed Feb 08, 2017 2:29 pm
- Main scooter: 125 Special
- Contact:
-
- registered user
- Posts: 14
- Joined: Wed Feb 08, 2017 2:29 pm
- Main scooter: 125 Special
- Contact:
Sorry, trying again
[urrl=https://www.flickr.com/gp/148346785@N03/Z714x2]
The picture shows the kick bumper without the rubber but I tried with or without and it's the same result
[urrl=https://www.flickr.com/gp/148346785@N03/Z714x2]
The picture shows the kick bumper without the rubber but I tried with or without and it's the same result
- HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
If you move it one spline and the teeth on the kickstart shaft dont touch the splines on first gear it should be ok.If the teeth touch the only way is to remove the side cover and adjust the kickstart ramp.
-
- registered user
- Posts: 14
- Joined: Wed Feb 08, 2017 2:29 pm
- Main scooter: 125 Special
- Contact:
Thanks for your answer ! I'll try again today and will let you know
(Hoping I'll be more gifted at doing that than at posting pictures...
(Hoping I'll be more gifted at doing that than at posting pictures...
- LI150
- registered user
- Posts: 630
- Joined: Wed Jan 07, 2009 8:30 pm
- Main scooter: Series 2 LI150
- Location: East Yorkshire
- Contact:
https://www.flickr.com/gp/148346785@N03/Z714x2
Sorted it for you
Sorted it for you
-
- registered user
- Posts: 14
- Joined: Wed Feb 08, 2017 2:29 pm
- Main scooter: 125 Special
- Contact:
Thanks to both of you ! Fitted the kick lever this afternoon, did it the way HxPaul recommended and it worked .
Only surprise was the fact that when kicking the space between the exhaust and the kick lever is not even half a millimeter ! But it's ok !
Only surprise was the fact that when kicking the space between the exhaust and the kick lever is not even half a millimeter ! But it's ok !
-
- registered user
- Posts: 14
- Joined: Wed Feb 08, 2017 2:29 pm
- Main scooter: 125 Special
- Contact: