Engine mount rubber dampers
-
Strummer10
- registered user
- Posts: 360
- Joined: Thu Oct 11, 2012 7:17 pm
- Main scooter: Lambretta LI Special 225
- Contact:
Just asking for opinions on what are perceived to be the best vibration free engine mount rubbers out there currently ? Its for a TS set up.
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
For my latest rebuild I used the 3 hole Indian ones from scooter restoration £20 a pair and they are great no more or less vibration than the bgm at £45
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
I agree with garry I used the 3 hole sr indian ones on both my TS1 and my imola .
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
I'm using Uni ones in a TS1 and they seem decent, good experience with SR ones in the past and present.
-
Strummer10
- registered user
- Posts: 360
- Joined: Thu Oct 11, 2012 7:17 pm
- Main scooter: Lambretta LI Special 225
- Contact:
Thanks..........engine bolt was a bit seized so ripped the rubbers on the old blocks gettting it our .....'oucj' 
-
fluff34567
- registered user
- Posts: 388
- Joined: Tue Dec 20, 2016 2:27 pm
- Location: Switzerland
- Contact:
I had the same on mine.. why don't people put a bit of grease on the bolt.. really gets on my tits.
-
Strummer10
- registered user
- Posts: 360
- Joined: Thu Oct 11, 2012 7:17 pm
- Main scooter: Lambretta LI Special 225
- Contact:
Yes agreed, took some pushing out too.......copper grease lol and lots of it