Yes decent tools are a must. Just for the hell of it I bought a Silverline 21mm combination spanner off eBay for £3.50 including delivery, it looks really well made but unfortunately if I use it on my front wheel nuts it flops around like a cock in a stocking, risking rounding off the flats, there's not much difference in fact between this and my Britool 22mm! It's that bad.
Regarding the circlip pliers you'll probably need two pairs, external ones for most of the fasteners and internal ones for front hub and mag flange etc.
Decent circlip pliers
-
Scooterdude
- registered user
- Posts: 796
- Joined: Sat May 28, 2016 4:51 pm
- Main scooter: Lambretta LI 125 S3
- Location: Skaville
- Contact:
-
corrado
- Dealer
- Posts: 2590
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
The Bergen set copes with the circlip on the mag housing and a similar sized one on an inboard disc brake.mr mugello wrote:Thanks. They look good value. Just paid £18 for the one Teng, but will be all I need hopefully. Makes job so much easier having decent tools. Does this set cover all clips including largest on Lambretta ?