Hi all
just had a new Polini 177 kit fitted and was advised to run in for 500km only using 3/4 throttle and to get it Dynoed, my question is do i do the 500km before i have it dynoed?
Dyno
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
You should have it ran in before the dyno work or have the bore/piston clearance adjusted accordingly if short of running in time.
Check with the kit instruction but 500km doesn't seem much.
Check with the kit instruction but 500km doesn't seem much.
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
If you have the jetting set right ok to run in but if it's running lean you could seaze it up I would get it dynoed to check and they will set it a tad rich for running in
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
As Mr punch says that's the way to do it.....