like this
![Image](http://i.ebayimg.com/images/g/a2kAAOSwUdlWgu32/s-l1600.jpg)
![Image](http://i.ebayimg.com/images/g/4BkAAOSwSdZWgu34/s-l1600.jpg)
The switch has one power feed in (live) and two feed outs (to indicators). I have connected the two feed outs to the relevant feeds to the flasher unit/bulbs but I have two live feeds to attach to one feed in (Red & White).
I can get the feed to light the bulbs buy not flash any advice?
I am using a beedspeed loom to EFL connectors and using standard EFL indicator wiring to switch.
Scoot also has DC feed.