I am after some advice on which of these kits to use the RT195 or the Gori 200 sport?
Any advice would be appreciated.
Cheers
small block kit advice
-
- registered user
- Posts: 1292
- Joined: Sun Dec 04, 2011 7:43 pm
- Main scooter: Li Avanti 225
- Location: York
- Contact:
.......this'll open a can of worms...
What are you after from the kit ? Tourer, "boy racer", 2-up, long trips, short trips, etc.
Any thoughts on gearing, exhaust, carb, etc....
Why only them 2 kits ?
![Wink ;)](./images/smilies/icon_e_wink.gif)
What are you after from the kit ? Tourer, "boy racer", 2-up, long trips, short trips, etc.
Any thoughts on gearing, exhaust, carb, etc....
Why only them 2 kits ?
-
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
There's load more options than that GT, Mugello, RB and so on.
Horses for courses though depends what you want from it.
Horses for courses though depends what you want from it.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
- barnsleybilly
- registered user
- Posts: 120
- Joined: Mon Jun 16, 2014 3:55 pm
- Main scooter: Li200
- Location: Wakefield
- Contact:
There's the same question over on the lcgb forum and still no consensus over which is the best smallblock kit available. Each has its fans.
If i were sticking to the original question i'd go with the rt195 simply because if i needed help or spare parts MB are in this country and at the end of a phone.
If i were sticking to the original question i'd go with the rt195 simply because if i needed help or spare parts MB are in this country and at the end of a phone.
Thanks for the replies.
I am just after a standardish kit for a bit of a runaround, as I am in jersey its just for short trips 1 up, got standard gp200 gearing with 22mm carb and a mbbgm clubman. Don't really want to go reed valve or big carb as I also have an rb22, just want something to putt around on.
I am just after a standardish kit for a bit of a runaround, as I am in jersey its just for short trips 1 up, got standard gp200 gearing with 22mm carb and a mbbgm clubman. Don't really want to go reed valve or big carb as I also have an rb22, just want something to putt around on.
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
If you've got a 22mil carb and a clubman, why do anything other than get your 150 barrel to GP150 spec (italian, obviously), get it rebored and a new piston?
CakeAndArseParty
I agree with previous poster. Just had a GP150 barrel bored to 63mil and a piston to match. Nice motor now running with 22mil carb and a big bore indian box pipe i had hung on garage wall. No record breaker but nice for round town and shortish ride outs.
Agreed with the previous....i personally wouldn't lay out over £500 just to potter around town.
Last edited by a.j on Mon Feb 22, 2016 12:06 pm, edited 1 time in total.
- EddieStone
- registered user
- Posts: 432
- Joined: Mon Aug 17, 2015 4:13 pm
- Main scooter: Lambretta Li 150
- Contact:
Isn't the speed limit 40mph on Jersey? Assuming anyone obeys the speed limit, of course